Hi
I see there is a thread on a gti head on a 1.6 etc but did not want to jump on that .
I have a 16v vitara motor with a cracked head . Also a 16v 1.6 swift carbed motor . Will the 16v block run ok with a 1.3 head , as it has efi already .
Cheers
Chris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1.3 head on 1.6 16v motor
Which 1.3 head? Is it a 16v too? If it's off a G series motor it should fit but if it's only an 8v you will be giving away a lot of power. If it's a 16v from a Swift then because the Vit runs north/south you will need to look at changing the cam and distributor to clear the firewall. I don't know how the 1.3 sohc 16v valve sizes compare to the 1.6 either so that may be something to check.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Who is online
Users browsing this forum: No registered users and 0 guests