Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

cams cages?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

cams cages?

Post by Hoonz »

say if you have a 4wd with a cams approved roll cage

and u want to take the cage out to put it into another 4wd

the only way is to cut the cage to get it out ... and re weld it in?

legal or not?
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 542
Joined: Thu May 05, 2005 8:53 pm
Location: Lysterfield

Post by krimnl »

the pipe cannot be cut & rejoined , the hoop and the legs ect must be 1 peice without joins
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

You could turn it into a bolt in type of cage bu being carefull were you cut it. Not sure if cams approve bolt in though.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
User avatar
Tiny
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Contact:
Contact Tiny

Post by Tiny »

I do bolt as standard, CAMS approved, 6mm clamps
If the above post did not offend you in any way please PM me so I can try harder!!
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

Post by Pinball »

as i understand it you can do bolt in sections, but there has to be a specified length of solid bar before you return to tube in the barwork running into/out of the bolted join.

how bout you just cut and shut the cars?

Spock
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

yep... I would be pulling the roof off..... cage out... roof on...

But then I drive a Land Rover and it is a mechano set.. unsure what vehicle you have and if you have that option
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

its all good the question has been answered

thanks all
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest