Outer Limits 4x4 Board

Hey all i'm new to the site had a bit of a look around seems like a good site.

But the real issue is i'm looking at doing a soa and just wanted to know if anyone has made new brackets for the diff for the springs to sit on. And is there a full high steer kit you can buy or have i just got to use bits and pices and if so any one know what bits are needed. Any help would be great. Thanks Rees

if you look at the top of the Nissan section you should see th Mq - Mk bible
Why don't you take a look in there
Scroll down to SPOA section & then come ask question if your still unsure

Where abouts you located dude?
Snake racing or Big Balls offroad have what you're looking for. You will also need extended brake lines and an angle finder for setting the castor. I did mine last year and its not too tricky as long as you can weld the spring perches strongly.
If you have any dramas PM me. (I did mine on a 40 series but its the same principle)

http://www.snakeracing.com.au

or,

http://www.bigballsoffroad.com

Like the others said, check the bibles up top. Seeing as your from brisneyland, you are aware that SOA is illegal and unroadworthy in QLD. If you knew this, then ignore my dribble...but if you didnt know it then now you do

There are also quite a few MQ/MK on here that are SOA, including mine just check through the members also

hey thanks for all the replies but now i know its illegal i'm not gonna do it thanks any way everyone

Sir Rollsalot
Posted: Mon Jan 23, 2006 4:07 pm

--------------------------------------------------------------------------------

Like the others said, check the bibles up top. Seeing as your from brisneyland, you are aware that SOA is illegal and unroadworthy in QLD. If you knew this, then ignore my dribble...but if you didnt know it then now you do

Thanks for that Sir Rollsalot you saved me a mistake[/quote][/url]