Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
im in the process of ditching the twin air filter setup and replacing it with a landcruiser single filter setup. (fit straight in...almost). any way i need to run the crankcase breather somewhere but dont realy wana run it back into the intake as it was.
ideas?
was thinkin of plumbing it downwards near the firewall somehwere but i think it might make a bit of a mess.
Legally,you are supposed to run it back into the air cleaner for emissions. However you can run it back into the chassis OR you can get an oil can from Autobarn or repco so it collects the oil and fumes. It has like a steel wool type material inside.
What you need to remember is that the breather is a 2 way street, it sucks in as well as breathing out so to prevent further wear and damage to your engine you should filter the air it breathes.
J Top
