Page 1 of 1
steerin on 87 lux after lift kit
Posted: Thu Jan 26, 2006 7:40 pm
by kegz
hey im jst wondering if you can get away with ust using a flattened u bolt to get a clearance between the drag linka nd u bolt on an 87 ln65 hilux. the one currently fitted it standard and has had an angle grinder taken to it. if not what is my cheapest option to get me out of trouble cheers
Posted: Fri Jan 27, 2006 5:43 pm
by YB.LOW4
yes i have done this not long ago. all we did was heated the drag link a little and bent it up just a little bit. we just heated it with the oxy then got the jack and jacked it up with a piece of steel on the jack pushing on the heating area. hope this helps
Posted: Fri Jan 27, 2006 7:55 pm
by HIGH ROLLER
Yeh mate u can buy the flattened u bolts from most suspension place i got mine from 4x4kotora in newcastle hope this helps ya
thanks
Posted: Sat Jan 28, 2006 6:12 am
by kegz
cheers dudes