Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

sd33 - sd33t

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

sd33 - sd33t

Post by Turbo Tonka »

my old man has a sd33t lined up to replace his old sd33. am i right in saying that the sd33t are 12v? what would have to be changed???starter,alternator,lights etc. wiring can still be used if the relays and so on are changed??? we just need to be sure, not mechanical freaks...anyhelp would be great
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

all of the above would need to be changed.... thats correct....

but if your SD33 is 24 volt.... might be easier just to take the alternator and starter off your old motor and put it on the turbo diesel...
that way its 24 volt.... and no changing everything else...

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

what about glow plugs??? these may need to be changed.......
Top
Posts: 15
Joined: Fri Nov 25, 2005 3:10 pm
Location: Moscow, Russia

Re: sd33 - sd33t

Post by Nikolay »

Here is a link to electric diagram SD33 (24V) and SD33T (12V) on the common sheet. You can find all equipment wich would have to be changed.
Top
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

OK

Post by Turbo Tonka »

rightyo, thanks all. so if we chose to stick to his 24v lights and everything else. the starter and alt off the old engine would have to go on,,,straight swap anyone????? the glow plugs got mentioned. this a correct one???? just get new ones i take it. sorry to be a pain.
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: OK

Post by Screwy »

Turbo Tonka wrote:rightyo, thanks all. so if we chose to stick to his 24v lights and everything else. the starter and alt off the old engine would have to go on,,,straight swap anyone????? the glow plugs got mentioned. this a correct one???? just get new ones i take it. sorry to be a pain.
jus switch your glow plugs starter and alternator off your 24volt system onto the turboi desiel 12 volt system

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

ok

Post by Turbo Tonka »

thanks screwy. also while your on here how long has your had the ute cab. Dad has had his cab undercoated for about 2 years now or maybe a bit more but money hasnt permitted to go any further. now his tired old sd33 makes it worse. I cant wait til we get it done then we can do my lux. Your truck looks tops, go tuff truck. so no bracketry changes?????glowys go straight on...
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Re: ok

Post by Screwy »

Turbo Tonka wrote:thanks screwy. also while your on here how long has your had the ute cab. Dad has had his cab undercoated for about 2 years now or maybe a bit more but money hasnt permitted to go any further. now his tired old sd33 makes it worse. I cant wait til we get it done then we can do my lux. Your truck looks tops, go tuff truck. so no bracketry changes?????glowys go straight on...
as we speak im updating my thread.... shes got a new look again :armsup:
thanks for the compliments...

yeh glow plugs un screw and screw back in easy as..... ute cab bolts straight onto the same body mounts thats correct.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 848
Joined: Fri Apr 02, 2004 12:01 pm
Location: Central Victoria

Post by Patroler »

Would the injector pump cotrol motor have to be changed also? I'd guess it would??
Injector control motor, glow plugs, starter and alt pretty much would cover the electrics on the motor.
There are no stupid questions, but there are a LOT of inquisitive idiots
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

Patroler wrote:Would the injector pump cotrol motor have to be changed also? I'd guess it would??
Injector control motor, glow plugs, starter and alt pretty much would cover the electrics on the motor.
that would be the absolute lot if you go the 24volt path....

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest