hey can someone give me some advice on how to takle replacing the rear main seal, i know the tranny comes out and all that but do i require any special tools or anything and any tips to make em last longer!
cheers heaps
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rear main fix?
rear main fix?
www.zookcentral.bravehost.com
WANTED 2 IN COILY LIFT KIT(COILS, SHOCKS)
WANTED 2 IN COILY LIFT KIT(COILS, SHOCKS)
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
From memory when you remove the box, then remove the clutch and flywheel. You will see the rear main seal and its housing plate. Just un-bolt hte housing plate, remove the seal. clean the area down, fit new seal to housing then re-fit it. As for lasting longer, take care when you fit it, smear a light amount of grease on its edges so it doesn't catch or tear when you push it into the housing plate. keep oil changes regular and use good oil. All oil seals will eventually leak, its just normal.
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
DON'T remove the end plate....
you'll just cause another oil leak, just pluck the old seal out with a screwdriver, clean the area down and then install the new seal, but make sure to lubricate the inner race of the new seal for initial startup to save the new seal from damage, while your at it, also check if your clutch has been contaminated from the oil leaking
you'll just cause another oil leak, just pluck the old seal out with a screwdriver, clean the area down and then install the new seal, but make sure to lubricate the inner race of the new seal for initial startup to save the new seal from damage, while your at it, also check if your clutch has been contaminated from the oil leaking
Trying to finish the Zook
OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Who is online
Users browsing this forum: No registered users and 0 guests