I saw a lot of BJ/FJ40 rigs on 35" or bigger tyers.Are they a stock diffs or some strnghtnend parts inside them?Is it possible that are toyota's diff's so much stonger that rover unit's.
cheers
Tihomir
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
BJ/FJ 40 diff strenght???
Moderators: toaddog, Elmo, DUDELUX
BJ/FJ 40 diff strenght???
Hello guys,
I saw a lot of BJ/FJ40 rigs on 35" or bigger tyers.Are they a stock diffs or some strnghtnend parts inside them?Is it possible that are toyota's diff's so much stonger that rover unit's.
cheers
Tihomir
I saw a lot of BJ/FJ40 rigs on 35" or bigger tyers.Are they a stock diffs or some strnghtnend parts inside them?Is it possible that are toyota's diff's so much stonger that rover unit's.
cheers
Tihomir
cv's are the weakest point. heat treateds are fairly cheap (through haltech), altho a sensibly driven 40 with 35's shouldn't NEED them... their nice to have so the strenghts there if you need it.
pinions fail occasionally and so do the earlier freewheeling hubs, but yes they are so much stronger than rover diffs
pinions fail occasionally and so do the earlier freewheeling hubs, but yes they are so much stronger than rover diffs
Spit my last breath
Toy cv's are not as strong as rover in standard form, centers and axels are a lot stronger in toy's.bad_religion_au wrote:cv's are the weakest point. heat treateds are fairly cheap (through haltech), altho a sensibly driven 40 with 35's shouldn't NEED them... their nice to have so the strenghts there if you need it.
pinions fail occasionally and so do the earlier freewheeling hubs, but yes they are so much stronger than rover diffs
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
i thought it depended on the model of rover, with the 110 cv's being uber tuff, and standard disco ones being relatively weak.Maggot4x4 wrote:Toy cv's are not as strong as rover in standard form, centers and axels are a lot stronger in toy's.bad_religion_au wrote:cv's are the weakest point. heat treateds are fairly cheap (through haltech), altho a sensibly driven 40 with 35's shouldn't NEED them... their nice to have so the strenghts there if you need it.
pinions fail occasionally and so do the earlier freewheeling hubs, but yes they are so much stronger than rover diffs
point is that yota diffs/ axles can cop a 35.
Spit my last breath
Ive had 35s on standard diffs for over 6 months and only just buggered a rear axle and spider gear (through driver error). Mates have run 35s for years and not had too many probs. As stated the biggest risk comes from the CVs. I rate broken CVs as the price of good wheeling. Go for it. You should be fine
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Who is online
Users browsing this forum: No registered users and 0 guests