Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

QLD 4x4 wreckers, (nissan)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

QLD 4x4 wreckers, (nissan)

Post by Dee »

the GU copped a bit of a massaging to the tupperware rear bumper/flare on the passenger side. Now the tail light assemb, or flares wont stay on properly/at all!

Genuine and new, they are $600 COST :shock: to the local panel beater. All up he quoted me $1600 for flares, the beating out a bit of a press in on the door, and a dent in the wheel arch, paint etc (both of which are mostly under the flare and should be hidden once its back on, if not they are almost un-noticable anyway)...

So after taking that price on board, and quickly tossing it overboard again ive decided to hunt around the wreckers.

Looking around for some decent wreckers in QLD.

Just googled, and emailed a place in Ballarat or somewhere...

Im hoping its fairly easy to find these parts as I assume most wrecks/write offs happen front first (head on) so there should be a few around?
All the gear, No idea...
Posts: 569
Joined: Sun Jan 11, 2004 11:36 am
Location: Sunshine Coast QLD

Post by Mark2 »

The other option is make the bits stay on as best you can then get all the panel work done at once before you sell it assuming you are going to do more damage.

Its usually cheaper to get a heap of small stuff done at once rather than go back several times
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

hey mate try creative conversions at brendale the are very resonable and should have whole rear sections of gu's i bought a gu rear door at a good price off them.
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

4wd off road wrecking, glenister road acherfield, 32778900.

They always have gu's and late model 4wds there.
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

Mark2,

i understand what you are saying. As it turns out i have some panel damage on the rear driver quater panel near the upper lights too, that i wanted to get seen to. Also, half of glasshouse forestry has been painted in a nice tone of dark metallic nissan blue, so i need to have a go at getting that buffed out.
He said that an option was he could try getting some of the mounting clips and hardware and plastic weld any broken pieces and generally get it tidied up and neatened and back on securely.

But yes, these are probably all things I would do before selling to get it all done at once, in case of future damage to a recently repaired vehicle.

dirtyGQ,

Thanks! ill give em a try. ;)
All the gear, No idea...
Posts: 433
Joined: Mon Jul 25, 2005 1:50 pm
Location: Kooralbyn, QLD

Post by crosswire »

I've used Southside 4x4 wreckers a couple of times through work. 3274 1222. They may be able to help.
Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

basketcase wrote:4wd off road wrecking, glenister road acherfield, 32778900.

They always have gu's and late model 4wds there.
Have used these guys a bit and they're good to deal with. Also Fester at All 4x4 Parts in Minden... 5426 8365. He's good for a stir too.

Cheers,
Ryano
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

try fester - good prices when OL or 4wd TV are mentioned
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

I use Gold Coast 4wd Wreckers all the time - 5591 5988
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Posts: 3614
Joined: Sat Nov 02, 2002 9:02 am
Location: Gold Coast

Post by 83 lux »

beebee wrote:I use Gold Coast 4wd Wreckers all the time - 5591 5988
I use them all the time
Talk to terry :armsup:
HOOLAY Wish i could buy boggers for my DH bike
Posts: 528
Joined: Sun Jul 24, 2005 12:13 am

Post by missinbits »

I 2nd that motion GC 4x4 wreckers is def the go and easy to find too.

http://www.wreckingyards.com/qld/ but thats a link for you for all qld wreckers ;)
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

wreckers

Post by matsmad »

Gold Coast 4x4 at ashmore are good. Used them a few times. DO NOT use Hinterland 4x4 at Molendinar. They r a bunch of w@nkers. :bad-words:
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Mates of mine with GU's attach the rear tail lights with springs back to the body work somewhere to help keep them in place rather then popping out.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests