Page 1 of 1

QLD 4x4 wreckers, (nissan)

Posted: Wed Feb 15, 2006 8:14 pm
by Dee
the GU copped a bit of a massaging to the tupperware rear bumper/flare on the passenger side. Now the tail light assemb, or flares wont stay on properly/at all!

Genuine and new, they are $600 COST :shock: to the local panel beater. All up he quoted me $1600 for flares, the beating out a bit of a press in on the door, and a dent in the wheel arch, paint etc (both of which are mostly under the flare and should be hidden once its back on, if not they are almost un-noticable anyway)...

So after taking that price on board, and quickly tossing it overboard again ive decided to hunt around the wreckers.

Looking around for some decent wreckers in QLD.

Just googled, and emailed a place in Ballarat or somewhere...

Im hoping its fairly easy to find these parts as I assume most wrecks/write offs happen front first (head on) so there should be a few around?

Posted: Wed Feb 15, 2006 9:37 pm
by Mark2
The other option is make the bits stay on as best you can then get all the panel work done at once before you sell it assuming you are going to do more damage.

Its usually cheaper to get a heap of small stuff done at once rather than go back several times

Posted: Wed Feb 15, 2006 9:48 pm
by dirtyGQ
hey mate try creative conversions at brendale the are very resonable and should have whole rear sections of gu's i bought a gu rear door at a good price off them.

Posted: Wed Feb 15, 2006 10:20 pm
by basketcase
4wd off road wrecking, glenister road acherfield, 32778900.

They always have gu's and late model 4wds there.

Posted: Wed Feb 15, 2006 10:22 pm
by Dee
Mark2,

i understand what you are saying. As it turns out i have some panel damage on the rear driver quater panel near the upper lights too, that i wanted to get seen to. Also, half of glasshouse forestry has been painted in a nice tone of dark metallic nissan blue, so i need to have a go at getting that buffed out.
He said that an option was he could try getting some of the mounting clips and hardware and plastic weld any broken pieces and generally get it tidied up and neatened and back on securely.

But yes, these are probably all things I would do before selling to get it all done at once, in case of future damage to a recently repaired vehicle.

dirtyGQ,

Thanks! ill give em a try. ;)

Posted: Thu Feb 16, 2006 7:41 am
by crosswire
I've used Southside 4x4 wreckers a couple of times through work. 3274 1222. They may be able to help.

Posted: Thu Feb 16, 2006 8:44 am
by Ryano
basketcase wrote:4wd off road wrecking, glenister road acherfield, 32778900.

They always have gu's and late model 4wds there.
Have used these guys a bit and they're good to deal with. Also Fester at All 4x4 Parts in Minden... 5426 8365. He's good for a stir too.

Cheers,
Ryano

Posted: Thu Feb 16, 2006 10:43 am
by benhl
try fester - good prices when OL or 4wd TV are mentioned

Posted: Thu Feb 16, 2006 11:25 am
by beebee
I use Gold Coast 4wd Wreckers all the time - 5591 5988

Posted: Thu Feb 16, 2006 12:09 pm
by 83 lux
beebee wrote:I use Gold Coast 4wd Wreckers all the time - 5591 5988
I use them all the time
Talk to terry :armsup:

Posted: Thu Feb 16, 2006 2:25 pm
by missinbits
I 2nd that motion GC 4x4 wreckers is def the go and easy to find too.

http://www.wreckingyards.com/qld/ but thats a link for you for all qld wreckers ;)

wreckers

Posted: Thu Feb 16, 2006 6:33 pm
by matsmad
Gold Coast 4x4 at ashmore are good. Used them a few times. DO NOT use Hinterland 4x4 at Molendinar. They r a bunch of w@nkers. :bad-words:

Posted: Fri Feb 17, 2006 3:03 pm
by just cruizin'
Mates of mine with GU's attach the rear tail lights with springs back to the body work somewhere to help keep them in place rather then popping out.