Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Axle Resplining

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Axle Resplining

Post by bubs »

Does any body know any shop in Brisbane which can spline 1.704" OD 40 spline axles? I am pretty sure this is the same size spline they use in the 40 spline Ford 9" stuff.

Thanks
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Re: Axle Resplining

Post by ISUZUROVER »

bubs wrote:Does any body know any shop in Brisbane which can spline 1.704" 40 spline axles?

Thanks
Do you know the pressure angle?

If it is a 30 degree pressure angle, the Maxi-Drive down the coast should be able to do it, if it is 45 degrees then anyone that can spline toyota axles should be able to do it.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Contact:
Contact bubs

Post by bubs »

No I am trying to find out what the specification is on the 40 spline Ford stuff, but Google seams to be broken :x

If i have do I have hobbing machines at work, just dont have a hob for that spline $
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

http://www.pirate4x4.com/tech/billavist ... dex1b.html

All ford stuff appears to be 45 spline judgeing by the table here.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

zentih engineering at milton did do this but the cost was rather prohibitive for a one off job - read like $500 + and that was a quote I had from about a year ago.

Tom
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

I had some splines remachined here in Melbourne for about $180 I think using an endmill which is quite labour intensive compared to hobbing but he did some other stuff for me at the same time.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests