Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tyre size ???????? conversion ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

tyre size ???????? conversion ?

Post by dirtyGQ »

i had tyres before that were 305/70 16 what size are my new tyre is they are 33x12.5 15 in the other measurement ?
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

this what u're looking for?

http://www.4lo.com/calc/gearmetric.htm
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: tyre size ???????? conversion ?

Post by RAY185 »

dirtyGQ wrote:i had tyres before that were 305/70 16 what size are my new tyre is they are 33x12.5 15 in the other measurement ?
According to that link 305/70R16 = 32.8"
Top
Posts: 75
Joined: Thu Jun 09, 2005 10:30 pm
Location: Melb

Post by saigo »

Heres another site.

http://www.1010tires.com/TireSizeCalcul ... ion=submit
Top
Posts: 305
Joined: Mon Oct 17, 2005 10:22 am
Location: BRISVEGAS

Contact:
Contact JOHNZ

Re: tyre size ???????? conversion ?

Post by JOHNZ »

dirtyGQ wrote:i had tyres before that were 305/70 16 what size are my new tyre is they are 33x12.5 15 in the other measurement ?

305/70-16 IS ALMOST THE SAME AS 33x 12.5-15 VARIES WITH DIFFERENT BRANDS OF TYRES

CHEERS JOHNZ
LOVELLS-EFS-DOBINSON-PROCOMP-BILSTEIN-KONI-RANCHO-TOUGHDOG-BLUEMAX
COIL SPACERS from $46pr
4WD SUSPENSION & BODYLIFTS 0418780611 A/H PH/FAX 07 33512692 - www.zordos4wdsuspension.com.au
Top
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

on the subject of size conversions what is a 7.00 r16 and a 7.50 r16 :?:

How do you figure these out :?:
Top
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

Thanks all now i know
Top
User avatar
Nev
Posts: 621
Joined: Wed May 25, 2005 10:00 am
Location: Brisbane, Australia

Post by Nev »

-Mick- wrote:on the subject of size conversions what is a 7.00 r16 and a 7.50 r16 :?:

How do you figure these out :?:
Good Question Mick..often wondered this myself. Those sizes are for split rims arent they? Im thinking they might come in 7 or 7.5 inch width and only come in one diameter...whatever size the base model cruisers and nissans with split rims had...not entirely sure tho.
01 GU Patrol 4.2TD Wagon
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

This was my understanding and may be wrong. Technically it's simple..... very similar to the method for metric.



7.5" wide and 7.5" tall tyre (100% aspect) on either side of the rim = 7.5" + 7.5" = 15" + 16" rim = 31"
Most however measure 31.8" (eg 32") - think this is cos the old school is measured as the size of the carcass excluding the tread... eg your size when worn down.

eg: http://www.simextyre.com/Tyres/LS803.asp first 7.50R16 I found in google is 810 mm or 31.89"

They do vary a bit in size as per normal.

Recommended rim size for 7.50R16 is normally 5.5" to 6" wide.

Using the same calculation 7.00R16 = 30" 6.00R16= 28"


Metric goes by something similar, except your main measurement is the tread width not the sidewall height (as there is different aspect ratios). And of course it's in mm.

305/70/16 therefore is 305mm wide = 12"

Sidewall height = 12" x 70% = 8.4"

Therefore sidewall height both sides of rim = 8.4" + 8.4" = 16.8"

16.8" + 16" rim = 32.8"

Clear now?


Now someone explain to me why most 33" tyres are 32.6" I really wanna know how that works......
Last edited by Beastmavster on Thu Feb 23, 2006 6:37 pm, edited 1 time in total.
Top
Posts: 676
Joined: Sat Jul 23, 2005 6:03 pm
Location: Maroochydore

Post by cutzook »

a 33 is nearly a 285/65 R16
http://www.fourbys.com.au/
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

cutzook wrote:a 33 is nearly a 285/65 R16
285/75-16 is approximately 32.8x11.2-16

And the 33x12.5-15 vs 305/70-16; same OD and width, but different aspect ratio = different sidewall height. And the 16" tyres probably have a higher load rating.

Scott
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

anyone know what a 900x16 is in inches?
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

34"....
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

andrew e wrote:anyone know what a 900x16 is in inches?
34 :?:
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I expect it's 9.00x16 and not 900mm x 16. 900mm is 36", but I've never heard of tyres defined that way.

Scott
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: tyre size ???????? conversion ?

Post by bogged »

dirtyGQ wrote:i had tyres before that were 305/70 16 what size are my new tyre is they are 33x12.5 15 in the other measurement ?
www.google.com
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 32 guests