Page 1 of 1
60 swivels on a 45
Posted: Thu Feb 23, 2006 8:01 pm
by FJOE45
G'day everyone. What a ripper of a site. Igot my hands on a 60 series front diff, I am wondering if the swivel hubs would fit on the front of my FJ45. I have taken the 60 series swivel hubs off and have cleaned them up and if they fit my 45 i will be replacing the seals and bearings, so, do you guys know if this can be done.
Posted: Thu Feb 23, 2006 10:07 pm
by 4sum4
Yeah they fit but you will need to change the tie rod ends or run later 47s arms or get some bushes from
www.man-a-fre.com
Posted: Fri Feb 24, 2006 1:03 am
by bad_religion_au
4sum4 wrote:Yeah they fit but you will need to change the tie rod ends or run later 47s arms or get some bushes from
www.man-a-fre.com
or run the knuckle arms of the knuckles that are already on it on the 60 series knuckles
Posted: Fri Feb 24, 2006 9:27 am
by beanz2
No problem. And if the FJ45 is a 1979 or later, the steering arms and tie rod taper are no different than the 60.
Dave
Posted: Fri Feb 24, 2006 7:48 pm
by FJOE45
Thanks a bunch guys, i do appreciate your answers, it helps me out a lot