Outer Limits 4x4 Board

Hi I'm ,I just wondering if anyone has fitted a nissan factory alloy bullbar to 2002 patrol .It has drivers side airbag & the bullbar is airbag compatible.
I just need to know what the procedure is for fittment as I dont want the airbag to go off or be dissabled/damaged etc.
Cheers

I cant be sure with the GU patrols but most sencers on cars i've pulled apart are either under the dash or on the firewall somewhere. you would have to find the sencers than wack it pretty hard with a hammer to set one off.

In the 10 years i've been working in a panel shop i've never seen anyone set one off pulling a car apart or putting one together.

Cheers Mick.

Thanks for the reply mate.Just wanted to be sure before i got into it.