ok! so i changed the brake master cylinder and have bled the brakes on my fj40...(82 model, discs on the front) why are they still not working properly? are there other ajustments that are required after bleeding them? also is there a gasket required between the master cylinder and the brake booster? one didnt come with the new master cylinder, so i assumed it didnt need one. could this be the root of my problems?
cheers, simo.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
brakes a miss
Moderators: toaddog, Elmo, DUDELUX
brakes a miss
fj 40, 82 model factory ps..... oohh yeh, 350 chev. lots more to do. getting there, getting there....
were they working properly before you put the master cyl on? Is it a daily driver?
Had difficulty getting discs to work on the 45 series ... turned out to be corrosion on the discs which in turn destroyed the pads ... new rotors + new pads = problem solved.
You would be amazed at how much braking effort comes from the drums at the rear also ... so might be a place to check - out of adjustment maybe?
Had difficulty getting discs to work on the 45 series ... turned out to be corrosion on the discs which in turn destroyed the pads ... new rotors + new pads = problem solved.
You would be amazed at how much braking effort comes from the drums at the rear also ... so might be a place to check - out of adjustment maybe?
If it's worth doing - it's worth doing to excess ...
check you booster.. common failure, assuming that you have a hard and full pedal but just won't stop. first check all lines in to the booster for crack's or loose, second. check vacume pump if its diesel. third check booster diaphram. let me know how you go
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
woops sorry i see you have a 350 installed. has the car had brake problems before. A good freind of mine had a 47 with a 400 fitted and had large cam which played havoc with the engine vacume. we installed a seperate vacume pump off an old corola i think.
HZJ75, 3in spring,2in cab,drop shackles,shock hoops and inverted shocks, fourbys 15x10 beadlocks, 36x12.5x15 simex ET2,
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
Comp Tray,Turboed 1HZ.
HZJ105R, 4in Tough dog, 315 75 16 MTZ, Turbo 1HZ.
i had to get a new bleeder valve for the front drivers side, wasn't bleeding properly. interestingly when i put my foot on the brakes the engine lifted off idle and a big puff of white smoke billowed out the exhaust. this problem has stopped now, but it definately sounds like a vaccuum pump issue from what your saying. why would white smoke come out the exhaust though???
fj 40, 82 model factory ps..... oohh yeh, 350 chev. lots more to do. getting there, getting there....
Who is online
Users browsing this forum: No registered users and 0 guests