Not to take anything away from EXHAUSTFIX but I have FREE TO GOOD HOME 2 of each of the following: 76.2mm(3")x1.6mmx90° and 76.2mm(3")x1.6mmx45° SS bends... We don't have any stock of 76.2mm(3") tube at the moment but I'm sure anyone interested in a SS snorkel and on a budget could organise something... So now all you need is a tig or a mate with one and a bit of tube. Of course it wont be a bling as a mandrel bent one piece unit but it should still look pretty cool...
http://img.photobucket.com/albums/v472/ ... d_size.jpg
http://img.photobucket.com/albums/v472/ ... nd_all.jpg
I'm in the Ferntree Gully area of Melbourne if ya interested...
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
SS Snorkel
Moderators: toaddog, TWISTY, V8Patrol, Moderators
SS Snorkel
I wish my lawn was EMO, then it would cut itself...
Re: SS Snorkel
what grade of stainless if they are 409 exhaust grade it does surfice rust do not use this grade on an intercooler you will get scale through yoour motor and turbo mus be either 316 or 321Bluefreak wrote:Not to take anything away from EXHAUSTFIX but I have FREE TO GOOD HOME 2 of each of the following: 76.2mm(3")x1.6mmx90° and 76.2mm(3")x1.6mmx45° SS bends... We don't have any stock of 76.2mm(3") tube at the moment but I'm sure anyone interested in a SS snorkel and on a budget could organise something... So now all you need is a tig or a mate with one and a bit of tube. Of course it wont be a bling as a mandrel bent one piece unit but it should still look pretty cool...
http://img.photobucket.com/albums/v472/ ... d_size.jpg
http://img.photobucket.com/albums/v472/ ... nd_all.jpg
I'm in the Ferntree Gully area of Melbourne if ya interested...
just a tip
exhaust fix
14 windsor rd croydon vic
ph 0397229766
NO MUFF TOO TUFF
14 windsor rd croydon vic
ph 0397229766
NO MUFF TOO TUFF
I've got the tig machine and can get the straight tube so if xenith doesn't get it I'll be happy to get them if I could.
I'm in Berwick so not far from you. my work number is 97750558 or home 97695196
Regards Andrew.
I'm in Berwick so not far from you. my work number is 97750558 or home 97695196
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Re: SS Snorkel
EXHAUSTFIX & xenith...EXHAUSTFIX wrote:what grade of stainless if they are 409 exhaust grade it does surfice rust do not use this grade on an intercooler you will get scale through yoour motor and turbo mus be either 316 or 321Bluefreak wrote:Not to take anything away from EXHAUSTFIX but I have FREE TO GOOD HOME 2 of each of the following: 76.2mm(3")x1.6mmx90° and 76.2mm(3")x1.6mmx45° SS bends... We don't have any stock of 76.2mm(3") tube at the moment but I'm sure anyone interested in a SS snorkel and on a budget could organise something... So now all you need is a tig or a mate with one and a bit of tube. Of course it wont be a bling as a mandrel bent one piece unit but it should still look pretty cool...
http://img.photobucket.com/albums/v472/ ... d_size.jpg
http://img.photobucket.com/albums/v472/ ... nd_all.jpg
I'm in the Ferntree Gully area of Melbourne if ya interested...
just a tip
They are T304 grade. They're yours if you want them, xenith... If not suitable, awill4x4 has second dibs...
I wish my lawn was EMO, then it would cut itself...
Who is online
Users browsing this forum: Bing [Bot] and 117 guests