Outer Limits 4x4 Board

Not to take anything away from EXHAUSTFIX but I have FREE TO GOOD HOME 2 of each of the following: 76.2mm(3")x1.6mmx90° and 76.2mm(3")x1.6mmx45° SS bends... We don't have any stock of 76.2mm(3") tube at the moment but I'm sure anyone interested in a SS snorkel and on a budget could organise something... So now all you need is a tig or a mate with one and a bit of tube. Of course it wont be a bling as a mandrel bent one piece unit but it should still look pretty cool...

http://img.photobucket.com/albums/v472/ ... d_size.jpg
http://img.photobucket.com/albums/v472/ ... nd_all.jpg

I'm in the Ferntree Gully area of Melbourne if ya interested...

i would like them mate as i am inter cooling my gq and will need some ring me 0408649097 phil

Bluefreak wrote:Not to take anything away from EXHAUSTFIX but I have FREE TO GOOD HOME 2 of each of the following: 76.2mm(3")x1.6mmx90° and 76.2mm(3")x1.6mmx45° SS bends... We don't have any stock of 76.2mm(3") tube at the moment but I'm sure anyone interested in a SS snorkel and on a budget could organise something... So now all you need is a tig or a mate with one and a bit of tube. Of course it wont be a bling as a mandrel bent one piece unit but it should still look pretty cool...

http://img.photobucket.com/albums/v472/ ... d_size.jpg
http://img.photobucket.com/albums/v472/ ... nd_all.jpg

I'm in the Ferntree Gully area of Melbourne if ya interested...

what grade of stainless if they are 409 exhaust grade it does surfice rust do not use this grade on an intercooler you will get scale through yoour motor and turbo mus be either 316 or 321

just a tip

I've got the tig machine and can get the straight tube so if xenith doesn't get it I'll be happy to get them if I could.
I'm in Berwick so not far from you. my work number is 97750558 or home 97695196
Regards Andrew.

u closer iwil4x4 u take if want i get cheap through work mate

EXHAUSTFIX wrote:

Bluefreak wrote:Not to take anything away from EXHAUSTFIX but I have FREE TO GOOD HOME 2 of each of the following: 76.2mm(3")x1.6mmx90° and 76.2mm(3")x1.6mmx45° SS bends... We don't have any stock of 76.2mm(3") tube at the moment but I'm sure anyone interested in a SS snorkel and on a budget could organise something... So now all you need is a tig or a mate with one and a bit of tube. Of course it wont be a bling as a mandrel bent one piece unit but it should still look pretty cool...

http://img.photobucket.com/albums/v472/ ... d_size.jpg
http://img.photobucket.com/albums/v472/ ... nd_all.jpg

I'm in the Ferntree Gully area of Melbourne if ya interested...

what grade of stainless if they are 409 exhaust grade it does surfice rust do not use this grade on an intercooler you will get scale through yoour motor and turbo mus be either 316 or 321

just a tip

EXHAUSTFIX & xenith...

They are T304 grade. They're yours if you want them, xenith... If not suitable, awill4x4 has second dibs...

will check price on post as i can get very cheap thanks mate will pm u tomorrow

Bugger, why did you have to live in melbourne, that's exactly what I been looking for.