Can an alternator be spun anti-clockwise and still function correctly if it was originally running clockwise?
Cheers
Daryl
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
alternator driven in reverse rotation?
Moderator: -Scott-
I'm not an alternator guru, but I don't think there'd be an issue electrically. The cooling "fan" behind the pulley will be running the wrong way, so you should change that over.
I don't know if bearings and brushers will have wear patterns peculiar to the running direction, and be less reliable running in the opposite direction?
Cheers,
Scott
I don't know if bearings and brushers will have wear patterns peculiar to the running direction, and be less reliable running in the opposite direction?
Cheers,
Scott
i don't think it will work maybe due to magnetic fields not sure
why would it be spinning backwards for? the only way this will happen is if you turn the alternator around as in the pully is now facing the rear of the car
why would it be spinning backwards for? the only way this will happen is if you turn the alternator around as in the pully is now facing the rear of the car
MUD BEERS & MAYHEM 4x4 & SOCIAL Group
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
[url=http://www.fourbys.com.au/]Fourby's tyre and mechanical[/url]
[url=http://www.4wdmonthly.com.au/forum/showthread.php?t=24441/]My build up for ttc[/url]
The magnetic field is generated by the field coil, which isn't polarity sensitive. If the field is reversed then so is the current generation; but it's an ac current anyway, which is rectified by the diodes, so I can't see that it's an issue.Bartso wrote:i don't think it will work maybe due to magnetic fields not sure
why would it be spinning backwards for? the only way this will happen is if you turn the alternator around as in the pully is now facing the rear of the car
But good point about the spinning backwards. I pictured he would be moving it to the other side of the engine, but that won't make a difference to the direction of rotation...
Cheers,
Scott
Yes pulley will be facing engine, with body of alt forward. Dimensionally big motor + new home + 6" into the firewall = need for lateral thinking 
, definite space issues!
Googling last night I found there is no problem with running backwards other than cooling fan efficiency, fan going backwards is pushing rather than pulling and curved blades set up for clockwise rotation.
Cheers
Daryl
, definite space issues!Googling last night I found there is no problem with running backwards other than cooling fan efficiency, fan going backwards is pushing rather than pulling and curved blades set up for clockwise rotation.
Cheers
Daryl
alternator backwards
You can get fans that will suit to run backwards. The only difference is the blades are facing opposite direction.
Who is online
Users browsing this forum: No registered users and 3 guests