Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Drilling pinion

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Drilling pinion

Post by 6.5 rangie »

Whats the easiest (best) way to mark out and drill the pinion on toy centres to suit Rover drive shaft. I don't really want to have to remove the pinion. To those who have done this, how did you do yours?

Damien
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Unbolt the flange, you will probably have to make a male to male locator as well so you have true centre for the tailshaft as well.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

just a had a look at the drive shaft and pinion flange, and i could make a locator with the rover pattern drilled in it, just haven't read anything about doing this when other people have done this conversion. :?
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

6.5 rangie wrote:just a had a look at the drive shaft and pinion flange, and i could make a locator with the rover pattern drilled in it, just haven't read anything about doing this when other people have done this conversion. :?
Drilling the flange is fine, never had a problem with this.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

Drilling the flange is fine, never had a problem with this.

Yes drilling the flange is fine, but i've never read about having to make a locator. Is it necessary, have others done this, thats what i'm asking
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

6.5 rangie wrote:
Drilling the flange is fine, never had a problem with this.

Yes drilling the flange is fine, but i've never read about having to make a locator. Is it necessary, have others done this, thats what i'm asking
You can get away with not doing it, but you may end up with vibes you cant fix or shagged bearings. Better to do it right the first time.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

Toy pinion flange needs machining to take rover shaft.

Drilling the pinion flange is easy.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Maggot4x4 wrote:Unbolt the flange, you will probably have to make a male to male locator as well so you have true centre for the tailshaft as well.
I dont understand why you would make a male to male adapter? To fit Rover shafts to a Toyota Flange you need to machine a recess into the Toyota flange for the rover shaft to locate. You cant just drill the flange out and bolt the shaft up. It wont bolt up flush. I have done this conversion enough times to know the flange must be machined.

Unless you have ground the locator off your rover tailshaft???? :shock: Or you have machined up a spacer that is female to male?

The OD of the locator on a Rover Shaft is "about" 5mm larger in OD than the Toyota one. I usually throw the Toyota flange in the lathe and machine the flange to suit the Rover Shaft then take a spare seperated Rover Yoke and Tack weld it to the Toyota Flange then use the Rover Yoke as a guide to drill the Toyota flange in a drill press.
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

RUFF wrote:
Maggot4x4 wrote:Unbolt the flange, you will probably have to make a male to male locator as well so you have true centre for the tailshaft as well.
Unless you have ground the locator off your rover tailshaft???? :shock: Or you have machined up a spacer that is female to male?
This may have happened when the Nissan diffs went in :roll: :D
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Maggot4x4 wrote:This may have happened when the Nissan diffs went in :roll: :D
I have also converted a Nissan flange to Rover and it needed a spacer made up. More like an Egg ring as the locator on the Nissan is larger than the locator on the rover.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 5 guests