Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ coil height

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

GQ coil height

Post by bad_religion_au »

Anyone got a std GQ coil they can measure the height of off the truck? oh and the coil wire diameter I got lifted springs but dont know how much.
Spit my last breath
Posts: 1434
Joined: Sat May 22, 2004 6:44 pm
Location: stalking

b

Post by blackmav »

Can do tomorrow
Short GQ, Petrol, Turbo.
GQ TD42 ute
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Re: b

Post by bad_religion_au »

blackmav wrote:Can do tomorrow
that would be much appreciated, thanks mate
Spit my last breath
Posts: 805
Joined: Thu Sep 18, 2003 6:07 pm
Location: lost

Post by fatassgq »

If your front bumpstops are in good order and not ripped or broken. then you should be about 60mm from bottom of rubber bumpstop to the steel hat inside the coil.

This is for standard GQ Patrol
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

fatassgq wrote:If your front bumpstops are in good order and not ripped or broken. then you should be about 60mm from bottom of rubber bumpstop to the steel hat inside the coil.

This is for standard GQ Patrol
i only have the springs, no gq to put them on, so i was looking for their uncompressed heights
Spit my last breath
Posts: 29
Joined: Sun Mar 12, 2006 2:01 pm
Location: Adelaide Sth OZ

Post by slingabrad »

Doing over time Adam? ;)
Posts: 29
Joined: Sun Mar 12, 2006 2:01 pm
Location: Adelaide Sth OZ

Post by slingabrad »

Doing over time Adam? ;)
Posts: 1434
Joined: Sat May 22, 2004 6:44 pm
Location: stalking

b

Post by blackmav »

Front 460mmx17mm
rear 390mmx16mm

90model lwb diesel
Short GQ, Petrol, Turbo.
GQ TD42 ute
Posts: 29
Joined: Sun Mar 12, 2006 2:01 pm
Location: Adelaide Sth OZ

Post by slingabrad »

cheers
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

slingabrad wrote:Doing over time Adam? ;)
anything to keep the boss happy :rofl:
Spit my last breath
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests