Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

L28 lift points

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1032
Joined: Mon Mar 17, 2003 10:14 am
Location: Newcastle, NSW

Contact:
Contact Heathx4

L28 lift points

Post by Heathx4 »

Silly question for you guys. The L28 is coming out tomorrow morning. Just got it all ready today. One thing I noticed - I couldn't see the lift point at the back of the engine! Where might it be? I don't really want to have to wrap something around the entire block. The front lift point also doesn't look too strong, but I hope it will be alright.
* Nothing is foolproof to a sufficiently talented fool *
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

undo all the bolts, get the matress out again, flop your rig on its side and push it out, if it didnt hurt last time i cant see it hurting again :D

you could always find a bolt hole at the rear and put a bolt through the chain and lift off that,
Top
Posts: 8459
Joined: Mon Nov 29, 2004 8:15 pm
Location: Townsville

Re: L28 lift points

Post by "CANADA" »

Heathx4 wrote:Silly question for you guys. The L28 is coming out tomorrow morning. Just got it all ready today. One thing I noticed - I couldn't see the lift point at the back of the engine! Where might it be? I don't really want to have to wrap something around the entire block. The front lift point also doesn't look too strong, but I hope it will be alright.


got a arc?

:twisted: or just start tearing into it and get down to the bare block...wrap some chains around and piss easy :D :D :D

could always just cut the front clip off and roll it out the side.

even better idea..you should have taken it out at mine and left it in my junkyard :roll: :armsup: :finger: :D

did manda get the shit for lifting the crane in the cab?
[quote="dazza30875"]whats "FAIL" mean[/quote]

[quote="fool_injected"]

Sometimes your funny Canada :D[/quote]
Top
Posts: 1032
Joined: Mon Mar 17, 2003 10:14 am
Location: Newcastle, NSW

Contact:
Contact Heathx4

Post by Heathx4 »

Funny bastards. Used two seats belts with a reef knot to wrap around the back of the block. Did the trick. Was handy for the gearbox too.
* Nothing is foolproof to a sufficiently talented fool *
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest