Page 1 of 1
Problem with transfer case on NJ Pajero
Posted: Mon Apr 03, 2006 2:51 pm
by Dash007
G'Day all, I have a 94 Pajero.
My problem is that when I am in low 4 going up hill it is fine but when i'm coming down in low 4 it wants to pop out of low
.
Can anyone help me ? Or what would a 2nd hand 1 cost ?
Cheers Dash.
Ps this is a great site
.
Posted: Mon Apr 03, 2006 5:58 pm
by Adomw
-7
I reckon it's the transfer lever is being pushed back by the console/ tranie tunnel - could happen if you've done a body lift or your gearbox mounts are stuffed
Ado
Posted: Mon Apr 03, 2006 7:23 pm
by Zute
The car is 12 years old, might be time for a bit a ajustment.
Posted: Mon Apr 03, 2006 9:44 pm
by Dash007
Zute wrote:The car is 12 years old, might be time for a bit a ajustment.
What do you mean? Adjust what? Or should I send it to Pajero heaven?
Posted: Tue Apr 04, 2006 12:32 am
by j-top paj
mine does the same thing occasionally.
i think it could be the mounts as mine dont look too healthy.
Posted: Tue Apr 04, 2006 11:36 pm
by Zute
Theres a whole heap of parts that could be worn in the selector. But if you have it fixed it should be good for another 12years.
Posted: Wed Apr 05, 2006 5:04 am
by Lordtrunks
there is a pin in the shifter rail it may be to far in or not far enough in it happened to a guy here after his tranny was rebuilt you can see the pin if you pull the cover off the top of the t-case were the shifter goes in.
Posted: Wed Apr 05, 2006 7:20 am
by Dash007
I shall give these a go on weekend and let you no how i go
Cheers Dash.