Page 1 of 1
Off the top of your head, size of air locker tubing?
Posted: Tue Apr 04, 2006 1:23 am
by DougH
Does any one know what the size of the air line going to the factory air locker is?
I think I need to extend mine after the 2 inch body lift.
I can get standard hosing or vac line put it doesn't fit well.
I figure it is some metric size.
I got my truck running so now it is time to start fixing other stuff.
Posted: Tue Apr 04, 2006 6:28 am
by Miyagi
4mm. i think...
Posted: Tue Apr 04, 2006 6:53 am
by Bitsamissin
It's 5mm a very uncommon size
4, 6 & 8mm are the most common air line sizes around and easy to get but try getting 5mm airline anywhere other than an ARB store.
Posted: Tue Apr 04, 2006 7:01 am
by DougH
Bitsamissin wrote:It's 5mm a very uncommon size
4, 6 & 8mm are the most common air line sizes around and easy to get but try getting 5mm airline anywhere other than an ARB store.
5mm for the ARB or 5mm for the factory locker?
The mention of the ARB store threw me off.
Posted: Tue Apr 04, 2006 8:38 am
by STIKA
i have manage to get some imperial line to fit to ARB line with snap connectors
Posted: Tue Apr 04, 2006 8:46 am
by DougH
STIKA wrote:i have manage to get some imperial line to fit to ARB line with snap connectors
I am not talking about ARB blue air line.
Posted: Tue Apr 04, 2006 11:49 am
by Adomw
Doug,
I used a bit of 1/4' fuel hose when I installed my factory locker - and before anyone flames me - the factory locker only runs on 5 or 6 psi
Ado
Posted: Tue Apr 04, 2006 2:11 pm
by Ian Sharpe
Adomw wrote:Doug,
I used a bit of 1/4' fuel hose when I installed my factory locker - and before anyone flames me - the factory locker only runs on 5 or 6 psi
Ado
Yep, thats the go, thats what I did, 1/4 " is easily available & yes the factory locker does run on very low PSI!.
Posted: Tue Apr 04, 2006 11:27 pm
by DougH
Ok 1/4 it is. Thanks every one.