Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Whats stock height from wheel to guard for...

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 181
Joined: Thu Apr 14, 2005 12:09 pm
Location: Geelong VIC

Whats stock height from wheel to guard for...

Post by Glennb »

Im just trying to figure out how much lift I got out of my SWB pajy. Does any body know what the distance is between the top of the wheel (15inch) too the bottom of the guard on a stock NJ SWB pajy.
Cheers
Glenn
Top
Posts: 201
Joined: Wed May 12, 2004 11:51 am
Location: Geraldton, Western Australia

Post by Adomw »

SWB

which end? front or rear?

Mines stock at 150mm rear and 90mm front with 31s

Ado
JK Unlimited Rubicon
2" lift
Dual locked, 1:4 crawler gears, swaybar disconnect
Stock and loving it
Mods to come
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

Mines an NJ LWB with 15" rims and 3" lift. From the top of the rim to the bottom of the guard it measures... front 330mm, rear 360mm. So i would imagine that a stock height vehicle should roughly measure... front 255mm amd rear 285mm! Other's may have different measurements tho?

Gabe
Top
Posts: 181
Joined: Thu Apr 14, 2005 12:09 pm
Location: Geelong VIC

Post by Glennb »

Sorry, for the rear. But I think Ive worked it out from the specs in the manual. Using the roof height. Looks that Ive only got the 40mm lift.
Cheers
Glenn
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests