Page 1 of 1
Whats stock height from wheel to guard for...
Posted: Tue Apr 04, 2006 9:39 am
by Glennb
Im just trying to figure out how much lift I got out of my SWB pajy. Does any body know what the distance is between the top of the wheel (15inch) too the bottom of the guard on a stock NJ SWB pajy.
Cheers
Glenn
Posted: Tue Apr 04, 2006 5:02 pm
by Adomw
SWB
which end? front or rear?
Mines stock at 150mm rear and 90mm front with 31s
Ado
Posted: Tue Apr 04, 2006 6:07 pm
by hudson44
Mines an NJ LWB with 15" rims and 3" lift. From the top of the rim to the bottom of the guard it measures... front 330mm, rear 360mm. So i would imagine that a stock height vehicle should roughly measure... front 255mm amd rear 285mm! Other's may have different measurements tho?
Gabe
Posted: Tue Apr 04, 2006 10:48 pm
by Glennb
Sorry, for the rear. But I think Ive worked it out from the specs in the manual. Using the roof height. Looks that Ive only got the 40mm lift.
Cheers
Glenn