Outer Limits 4x4 Board

During the wagon chop, I noticed the fuel tank has two fuel lines coming out of the tank and go to a plastic "thing"...then the two lines come out the other side and go back to the fuel tank.

I have no idea what this is for, and without pics you guys may find it hard to understand what part I am talking about....but if you do...

what is this bit? and do I need it? Can I remove it and just plug up the holes in the tank?

AFAIK its basically a breather, allows any excess/overflow fuel from leans etc (and expanding gases) somewhere to go, then allows the fuel to return to the tank.
I plumbed all the 'extra' hoses into a manifold (box tube with outlets) and ran one tube up behind the tray.

so could i disconnect the hoses from this and just run the hoses from the outlets to the inlets on the tank?

Plumb them all into the one outlet at the fuel filler? You could, but may have probs later on different angles/leans. As long as air can get into and out of the tank, shouldnt be a prob.

I ran all four small ones into a booty manifold on the r/h chasis rail and then ran one long hose up behind the headboard. I used an old diff breather on the end to prevent crap from getting into the tank.

Mr loomis lol....

have you taken anymore pics of your 60's transfer into a beast?

Not sure it will stack up to mr sixty's beast... now thats a monster truck lol..

Jarrod

Pffft....

Thanks for the compliments Jarrod, but my ol' girl is nuthin but a stock dual cab, diesel 60.........

just with a wittle chev diesel.....

jakam04 wrote:just with a wittle chev diesel.....

Yup! Just a teeny baby motor......and diesel, so its slooooow......

See.......

thats still the best 60 chop ive seen >_<

Thanks Shadow

Not too bad a ramp with open diffs ay...