just contemplating engine swaps and the like for my 62 series cruiser
the 3f just hasnt got eough low down torque for towing my trailer, i can get hold of a 2f motor that is in good condition with headers and a exhaust to suit
anyone know if the fuel economy is the same or similar? being that the 2f is 4.2 litre rather than 4 litre capacity
the 2f would work well with my h55f 5 speed box too and factory 4.1s
thanks in advance!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
swap 3f engine for a 2f?
Moderators: toaddog, Elmo, DUDELUX
swap 3f engine for a 2f?
60 SERIES CRUISER
NO LIFT!
31s
stock as a rock
NO LIFT!
31s
stock as a rock
it will bolt in yes but the swap will probably be illegal, you can't swap in a motor that is older than the motor that comes out.
the 3F has higher power and torque than the 2F, the 2F may be slightly better off idle but that's about it. a set of extractors and possibly some better carburation on the 3F could be a better option.
the 3F has higher power and torque than the 2F, the 2F may be slightly better off idle but that's about it. a set of extractors and possibly some better carburation on the 3F could be a better option.
Free air locker to the first 20 callers!
Who is online
Users browsing this forum: No registered users and 0 guests