Outer Limits 4x4 Board

Passenger side tcase mount ripped today. It slammed the shifter so hard into the drivers side of the shifter hole it bent the selector tip. Could not select anything on the 4wd side after deselecting 4low.

Soft as anything, bent it back with a hammer and a block of hardwood when I got home.
Replaced the mount on the track with a bolt and a shock bush sandwiched between the tcase arm and mount.

I have now replaced all three mounts with bolts and sway bar bushes, much better.

Glad to hear you,ve got it fixed ok. Did you lift the T-box ?

Glad to hear it's fixed. Especially as it broke trying to get me going again.

Thanks.

Zute wrote:Glad to hear you,ve got it fixed ok. Did you lift the T-box ?

This is still to do... Ill need a few days to get round to putting some mounts on the tcase ring that Roctoy got laser cut and cutting the old mount off the chasis. As you can see it wasn't an expensive or long job to fix... about 30 mins to do including stuffing around doing some lifting of plants into the garden for the missus.

Ah, so you had to pay for your day out too.