Making throttle cable
Posted: Wed Apr 19, 2006 8:20 pm
I was wondering who makes throttle cables up in vic, or do i have to make one from an old pushy cable myself
Page 1 of 1
Posted: Wed Apr 19, 2006 8:57 pm
There is a company in melbourne that is called Flexable drive agencies in melbourne that repair and make up cables for just about everthing.
Posted: Wed Apr 19, 2006 9:05 pm
theres a guy in Greensborough that does them, can't remeber the company name, did my Rangie - 308 one for $45,. The one for my chev desiel is made from a motorbike accelerator cable, works a treat.
Damien
Damien
Posted: Wed Apr 19, 2006 11:36 pm
if they are no good theres a mob in flemington as well. ill look up the details later.
Posted: Wed Apr 19, 2006 11:47 pm
Company Nam is talking about is
SPEEDSCREEN
LOCATED AT:
151 MT. ALEXANDER ROAD
FLEMINGTON, VIC 3031
AUSTRALIA
PHONE: 03 9376 0714
FAX: 03 9372 1082
E-MAIL: sales@speedscreen.com.au
SPEEDSCREEN
LOCATED AT:
151 MT. ALEXANDER ROAD
FLEMINGTON, VIC 3031
AUSTRALIA
PHONE: 03 9376 0714
FAX: 03 9372 1082
E-MAIL: sales@speedscreen.com.au
Posted: Wed Apr 19, 2006 11:49 pm
disclaimer: black haig posted that last message. nam does not refer to himself in the third person.
Posted: Thu Apr 20, 2006 1:38 am
Ha Ha, Thanks allN*A*M wrote:disclaimer: black haig posted that last message. nam does not refer to himself in the third person.
Posted: Thu Apr 20, 2006 2:42 pm
Anybody know of a place in Brisbane to do the same?
Posted: Thu Apr 20, 2006 3:46 pm
there is a flexable drive on boyland ave off beaudesert road at coopers plains 32742777beebee wrote:Anybody know of a place in Brisbane to do the same?
a mate of mine just his done for his lancia took in his old one and gave them the new measurements and it cost around the $180 mark
Posted: Fri Apr 21, 2006 6:32 am
Did he get a new car with that too? I hope it included rego!Bartso wrote:there is a flexable drive on boyland ave off beaudesert road at coopers plains 32742777beebee wrote:Anybody know of a place in Brisbane to do the same?
a mate of mine just his done for his lancia took in his old one and gave them the new measurements and it cost around the $180 mark
Posted: Fri Apr 21, 2006 6:40 am
we did one ourselves for Micks HQ Dave, we just got a bracket to mount to the pedal from California Speed Supplies and cut to suit..
i assume this is for your buggy so would be a cheaper way of doing it and you wouldnt need a bling bracket for the pedal like we used either..
dave
i assume this is for your buggy so would be a cheaper way of doing it and you wouldnt need a bling bracket for the pedal like we used either..
dave
Posted: Fri Apr 21, 2006 9:17 pm
You cannot use electrical solder to make cables, you need industial solder for a stronger joint, especally on motorcycle brake and clutch cables.
J Top
J Top
Posted: Fri Apr 21, 2006 9:51 pm
Yea if i make one it'll be silver soldered