Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4 " Stainless Steel Snorkle for GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 1068
Joined: Mon May 31, 2004 2:41 pm
Location: in the ghetto

Contact:
Contact morkz

4 " Stainless Steel Snorkle for GQ

Post by morkz »

Hey have a look at the snorkle,

Let me know what you think these are available for sale for $550

Comes with mounting brackets and rubber ends for the whole in the gaurd all you need next is to plumb into your air cleaner setup.
You do not have the required permissions to view the files attached to this post.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Top
Posts: 477
Joined: Mon Mar 21, 2005 3:49 pm
Location: here

Post by DanielS »

Looks really well finished James, good job

Daniels
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: 4 " Stainless Steel Snorkle for GQ

Post by bogged »

morkz wrote:Hey have a look at the snorkle,

Let me know what you think these are available for sale for $550

Comes with mounting brackets and rubber ends for the whole in the gaurd all you need next is to plumb into your air cleaner setup.
Look great :cool:

Can you do both sides of car? Matching left/Right to suit GU? :armsup: :armsup:

Also can you do different lengths along the guard?
EG Diesel takes longer to right up behind headlight, Petrol is shorter...
Top
Posts: 1068
Joined: Mon May 31, 2004 2:41 pm
Location: in the ghetto

Contact:
Contact morkz

Re: 4 " Stainless Steel Snorkle for GQ

Post by morkz »

bogged wrote: Look great :cool:

Can you do both sides of car? Matching left/Right to suit GU? :armsup: :armsup:

Also can you do different lengths along the guard?
EG Diesel takes longer to right up behind headlight, Petrol is shorter...
Will get some made up for GU on my truck hopefully.

We discussed the different lengths along the gaurds however they are more prone to damage these are cheaper to make and its actually not that difficult to move things around in your engine bay.

These snorkles have been made for 4.2 petrol, 4.2 diesel and the one in the orange is running an infinity V8.

Someone is already running one on there 4.2 petrol and it looks so much neater than the air snorkles that run down the length of the gaurd but thanks for the feedback fellas.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Top
Posts: 1068
Joined: Mon May 31, 2004 2:41 pm
Location: in the ghetto

Contact:
Contact morkz

Re: 4 " Stainless Steel Snorkle for GQ

Post by morkz »

bogged wrote: Look great :cool:

Can you do both sides of car? Matching left/Right to suit GU? :armsup: :armsup:

Also can you do different lengths along the guard?
EG Diesel takes longer to right up behind headlight, Petrol is shorter...
Will get some made up for GU on my truck hopefully.

We discussed the different lengths along the gaurds however they are more prone to damage these are cheaper to make and its actually not that difficult to move things around in your engine bay.

These snorkles have been made for 4.2 petrol, 4.2 diesel and the one in the orange is running an infinity V8.

Someone is already running one on there 4.2 petrol and it looks so much neater than the air snorkles that run down the length of the gaurd but thanks for the feedback fellas.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

looks good. Do you have any pics of the car side on to show how the top sits against the vehicle and of the mounts?
Ransom note = demand + collage
Top
Posts: 1068
Joined: Mon May 31, 2004 2:41 pm
Location: in the ghetto

Contact:
Contact morkz

Post by morkz »

grimbo wrote:looks good. Do you have any pics of the car side on to show how the top sits against the vehicle and of the mounts?
dont have any on me at the moment but tommorow i should be able to take some for you.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Top
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Contact:
Contact weeman

Post by weeman »

Here is the top half of the snorkle on the roof
You do not have the required permissions to view the files attached to this post.
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Top
Posts: 447
Joined: Mon Dec 15, 2003 8:44 am
Location: Townsville

Post by BigMav »

Looks real nice but I think it would be good if you could make them in different lengths along the guard because some of us already have a hole further down the guard. But yeah I like it a lot.
1989 Ford Maverick Turbo Diesel Tourer
4" spring lift 2" body lift
33" MT/R's
Top
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Contact:
Contact weeman

Post by weeman »

if i got some interest say 5 people min we could have them made up for to run the length of the panel....

so post away if your interested
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Top
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

I am very very interested in one for a GU...

Its a 3.0TD... But i *think* the airbox is same position as 4.2? I may be wrong...

Anyway, I dont think it matters too much where it enters panel on mine, there will have to bee a run of tubing inside that panel down to the airbox, which could probably be custom/flexible or something... (doesnt have to be stainless all the way)
All the gear, No idea...
Top
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

bump?? :?
All the gear, No idea...
Top
Posts: 1068
Joined: Mon May 31, 2004 2:41 pm
Location: in the ghetto

Contact:
Contact morkz

Post by morkz »

DEEV8 wrote:bump?? :?
is it possible to wait till after the outback?

just flat out getting trucks ready for it
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Top
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

morkz wrote:
DEEV8 wrote:bump?? :?
is it possible to wait till after the outback?

just flat out getting trucks ready for it
ahh ok... wondering what had happened and why the thread had gone dead... ;)
if i got some interest say 5 people min we could have them made up for to run the length of the panel....

so post away if your interested
All the gear, No idea...
Top
Posts: 136
Joined: Sat Sep 04, 2004 9:40 am
Location: Wellington, NZ

Post by legsx1 »

What do you use around the hole in the gaurd - I have cut a hole in my gaurd for a 4" snorkle and I am wondering what to put around the cut. Maybe a piece of fuel rubber hose with a slit in it
worthog who likes to play in the mud, just follow me, if you can
Top
Posts: 771
Joined: Wed Jun 23, 2004 9:34 pm
Location: greensborough, vic

Post by big bundy »

u can get it from clack rubber, just a flat peice of rubber, with a slice down the middle, finish's off the hole really well!
bundy's suck ass
LWB patrol's are where its at!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest