got the same thread in the toyota section...but chasing quick responces on this one!
Installing a dual battery system in my truck in the next week or so. But I am wanting to keep the front end as light as possible. So would it be avisable to mount one of the batteries in the cab. I just bought 2 new batteries....one kick battery and one deep cycle battery (both are sealed units).
So if I was to fit one of the batteries in the cab....which one would be best?
If I mount the axillary battery in cab....would I lose too much power in the winch having such a long power cable?
thanks in advance!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
battery location?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
battery location?
L.S Canvas & P.V.C
www.lscanvas.com.au
www.lscanvas.com.au
I'd be more inclined to winch off main battery than auxillary deep cycle.
I think the voltage drop would be noticable if winching battery in cab, likewise so would cranking power and it would probably be advisable to reposition fusable links inside cab if main in cab (keep fuse close as possible to battery to prevent fire in the event of a short). If using good lights, voltage drop should be negligable.
When i do the chop to my GQ I will be locating auxillary battery(s) in cab or ute to run lights, etc and main cranking battery will remain in engine bay.
I'm no expert on this subject, just my opinion
I think the voltage drop would be noticable if winching battery in cab, likewise so would cranking power and it would probably be advisable to reposition fusable links inside cab if main in cab (keep fuse close as possible to battery to prevent fire in the event of a short). If using good lights, voltage drop should be negligable.
When i do the chop to my GQ I will be locating auxillary battery(s) in cab or ute to run lights, etc and main cranking battery will remain in engine bay.
I'm no expert on this subject, just my opinion
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Premiers 1999, 2007, 2009
Spoon 2010
I'm pretty sure its ok to use sealed batteries contained within a 'battery box' which is vented outsidei think its illegal to have it in the cab, and for good reason. The fumes can kill if something goes wrong.
[color=violet]G[/color][color=white]O[/color][color=yellow] S[/color][color=blue]T[/color][color=yellow]O[/color][color=white]R[/color][color=violet]M[/color]
Premiers 1999, 2007, 2009
Spoon 2010
Premiers 1999, 2007, 2009
Spoon 2010
Who is online
Users browsing this forum: No registered users and 5 guests