Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Can you swap rear diff centres 60 to 80

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Can you swap rear diff centres 60 to 80

Post by Surfin Alec »

I have an opportunity to swap my rear LSD center for my mates 60 center with an air locker.
The 60 is a 83 petrol and the 80 is a 97 turbo diesel. I imagine that they are both 4.1:1. Just want to know if the bolt holes / flanges are the same.

Thanks,

Alec
GO the 80...The mods have started :-)
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Re: Can you swap rear diff centres 60 to 80

Post by bad_religion_au »

Surfin Alec wrote:I have an opportunity to swap my rear LSD center for my mates 60 center with an air locker.
The 60 is a 83 petrol and the 80 is a 97 turbo diesel. I imagine that they are both 4.1:1. Just want to know if the bolt holes / flanges are the same.

Thanks,

Alec
got a feeling the flange is different, but swap the female end of the driveshaft with him if it is (the splines should work together?)

the 60 will be 4.11:1, the 80 4.1:1... not enough difference to worry about
Spit my last breath
Top
Posts: 638
Joined: Mon Nov 04, 2002 7:52 am
Location: A little north of sydney

Re: Can you swap rear diff centres 60 to 80

Post by dave »

bad_religion_au wrote:
Surfin Alec wrote:I have an opportunity to swap my rear LSD center for my mates 60 center with an air locker.
The 60 is a 83 petrol and the 80 is a 97 turbo diesel. I imagine that they are both 4.1:1. Just want to know if the bolt holes / flanges are the same.

Thanks,

Alec
got a feeling the flange is different, but swap the female end of the driveshaft with him if it is (the splines should work together?)

the 60 will be 4.11:1, the 80 4.1:1... not enough difference to worry about
Why not just swap the pinion flanges over
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Re: Can you swap rear diff centres 60 to 80

Post by midi73 »

dave wrote:
bad_religion_au wrote:
Surfin Alec wrote:I have an opportunity to swap my rear LSD center for my mates 60 center with an air locker.
The 60 is a 83 petrol and the 80 is a 97 turbo diesel. I imagine that they are both 4.1:1. Just want to know if the bolt holes / flanges are the same.

Thanks,

Alec
got a feeling the flange is different, but swap the female end of the driveshaft with him if it is (the splines should work together?)

the 60 will be 4.11:1, the 80 4.1:1... not enough difference to worry about
Why not just swap the pinion flanges over
I agree This is all I did when I swaped a bj42 gearbox & transfercase into a bj73. I just swaped the flanges over in the transfercase. The same would go for a diff.
Top
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Post by Surfin Alec »

Thanks...

Alec
GO the 80...The mods have started :-)
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests