Outer Limits 4x4 Board

Gday all,

Just wondering if anyone has an old bearing or knows the part number or diamensions of the input shaft bearing of a pre 83 1 liter xfer case(the one without the 4wd switch). Its getting very noisey and before i pull it apart i'd like to have a new bearing ready to go straight in.
Also where bout would be the best place to it and the seal, brizzy southside.
Cheers Dan

JrZook wrote:Gday all,

Just wondering if anyone has an old bearing or knows the part number or diamensions of the input shaft bearing of a pre 83 1 liter xfer case(the one without the 4wd switch). Its getting very noisey and before i pull it apart i'd like to have a new bearing ready to go straight in.
Also where bout would be the best place to it and the seal, brizzy southside.
Cheers Dan

Input shaft bearing: 6205JRC3 (OE# 08113-62050)
Input Shaft Oil Seal (and front output): OE Only #09283-35020

Sorry mate, can't tell you where to get in Brisvegas, except that the bearing is a common size and will be obtainable from most bearing outlets (or a Suzuki dealer). The seal will have to be got from a Suzuki dealer.

Pagie