Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pressure Plate bolt torque

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Forum rules
Post Reply
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Pressure Plate bolt torque

Post by sudso »

Just putting the new clutch in.

The manual says to tighten the p/plate bolts to 2.2 Nm WTF! :shock:

Elsewhere the manual says the torque value for M8 bolts is 20 - 22 Nm

Anyone got info on this, I cant believe that pressure plate bolt torque is only 2.2Nm or 20ft.lb
that manual is confusing!

cheers, sudso
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 274
Joined: Tue Nov 16, 2004 7:38 pm
Location: Gosford NSW

Post by rainsey »

Hey Sudso,

I have the genuine Holden CD Manual and it has the tourqe for the bolts to be 17.6 +/- 4.9 N.m ( 13.0+/- 3.6 lb.ft)... (this is for the V6).

Cheers

Rainsey
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

Thanks Rainsey, I took a punt and did em to 20Nm just to be on the safe side.
Now your reply puts me at ease! I dont have to pull the gearbox out again to retension those bolts. Phew!!

I know who to contact now for correct info ;) :D
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 274
Joined: Tue Nov 16, 2004 7:38 pm
Location: Gosford NSW

Post by rainsey »

Dude,

More than happy to help out.

Cheers

Rainsey
Top
Post Reply

Return to “Dmax / Isuzu / Holden / Great Wall”

Who is online

Users browsing this forum: No registered users and 0 guests