Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

a few snorkel Qs

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

a few snorkel Qs

Post by j-top paj »

just installed the snorkel on the GU and was wondering about the 2 factory drain holes.
now do i plug them up and have it so air can ONLY get in via the snorkel, or do i leave them so a little water can still escape out?
one is a really small hole maybe 2-3mm diameter and its at the bottom of one of the air box pipes. and it looks like its desined to trap any water that does enter. also is the little rubber valve looking thing attached to the bottom of the air box.
my understanding is that when water is in the box it drains out through the valve but when the engine is reving it closes from the suction of the engine..
any thoughts?

i tried blocking the top of the snorkel with my hand to see if i could stall the engine to see for leaks and these two points are the only place i found.


also what do people do when getting their car washed?
i usually do it myself but im thinking that one day if i ever do go to a automatic car wash... if they make them 2.1m high?? :? that what should i do about the snorkel? is it designed with it angled down to not let water in?

any thoughts people??
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

block them up ,in a deep water crossing those 2 small holes may stop u short of getting across

a good silicone should do the job ,also make sure its oxygen sensor safe or you may cause yourself a problem
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: a few snorkel Qs

Post by bogged »

j-top paj wrote:now do i plug them up and have it so air can ONLY get in via the snorkel, or do i leave them so a little water can still escape out?
where does the water go when its PISSING down rain and your driving in it for a few hours?
Dont block the drain holes... Why do you think they put them in there?
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Re: a few snorkel Qs

Post by chimpboy »

bogged wrote:
j-top paj wrote:now do i plug them up and have it so air can ONLY get in via the snorkel, or do i leave them so a little water can still escape out?
where does the water go when its PISSING down rain and your driving in it for a few hours?
Dont block the drain holes... Why do you think they put them in there?
... and be organised so you have some tape or some other way of blocking them when you stop and check under the bonnet to prepare your vehicle for a water crossing.

Jason
This is not legal advice.
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

this is what ive been thinking.
i need them for everyday driving but on a long deep crossing i could get in shyte.

maybe if i block the one thats hard to get to, and leave the other one on the airbox.
i might look for a plug that i could use when doing big crossings.
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

j-top paj wrote:this is what ive been thinking.
i need them for everyday driving but on a long deep crossing i could get in shyte.

maybe if i block the one thats hard to get to, and leave the other one on the airbox.
i might look for a plug that i could use when doing big crossings.
I have never bothered to block any holes while crossing bonnet deep rivers.
others in our club wiht safari snorkels on GQs have also done the same on same river on same trip with no issue.

if your in doubt, call Safari and see what they have to say.
User avatar
Ben
Posts: 4434
Joined: Thu Nov 28, 2002 3:25 pm
Location: Melbourne

Post by Ben »

Call me stupid, but I'd be mighty surprised to hear of a snorkel manufacturer who wouldn't factor in deep water crossings...so odds are the factory holes are there for a reason.
Apparently people think I'm too patronising (that means I treat them like they’re stupid).
Posts: 11
Joined: Tue Apr 25, 2006 12:31 pm
Location: alice springs

Post by andy preuss »

fitted a safari snorkle not long ago on a gq and the destructions
said to silicone the rubber flapper up.
i was told any rain sucked in would dry up with engine heat. cheers
Posts: 1254
Joined: Mon May 16, 2005 8:21 pm
Location: Sth Brissy

snork

Post by LuxyBoy »

Put a donaldson head on it and it won't get water in it from the rain :)
Kind Regards,
Brad
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

I am going to Weld up the std hole and put a Boat bung in, That way im guarenteed a perfect seal when i need to cross deep water. Seems the easiest/cheapest/foolproof method for me

Cheers
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Ben wrote:Call me stupid, but I'd be mighty surprised to hear of a snorkel manufacturer who wouldn't factor in deep water crossings...so odds are the factory holes are there for a reason.
I'm not going to call you stupid, but some of the manufacturers apparently claim the snorkels are for "dust". They don't make a big noise about it, but they hide behind it later when people total their engines while relying on the snorkel to keep them safe.

Jason
This is not legal advice.
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

I Replaced the rubber water separetor by Bronze welding a 12mm thread where the OE rubber was.

Than ran A flexy hose down in the wheel well with a ball valve where its easy to operate open` closed :?:
GQ with big nuts
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

Not all cars have silly rubber valve and they dont hydraulic the engine when it rains.

Also what if the silly rubber valve is submerged for a while whilst the engine is not running (maybe the engine stalls and you have to be recovered?)

Do you trust a 15 year old bit or crappy rubber to protect your engine?

Seal the bastards up :D
The hardest thing about owning a jeep is telling your parents you're g a y!!
User avatar
Ben
Posts: 4434
Joined: Thu Nov 28, 2002 3:25 pm
Location: Melbourne

Post by Ben »

chimpboy wrote:but some of the manufacturers apparently claim the snorkels are for "dust".
:shock: :shock:

Surely that can't be Safari - they use a video of a 4x4 in bloody deep water surviving because of their snorkel.
Apparently people think I'm too patronising (that means I treat them like they’re stupid).
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

..

Post by JemmyBubbles »

Fascination with deep water ?? Just stay away :lol: Honestly do you need to be driving through bonnet deep water ? I would be thinking a few things through first -not hacking on anyone but if it can be avoided then do soo. If you ultimately have to then I would be tarping, sealing holes with tape/silicon everything at your disposal...

As for holes in your airbox, It is like weep holes in the mortar of top ridges when installing roof tiles. Water and shit can get trapped and if it doesn't have any where to go then the roof will leak. THey are fairly necesaary...
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Posts: 3552
Joined: Wed Apr 14, 2004 9:46 pm
Location: Ormond VIC

Re: ..

Post by muppet_man67 »

JemmyBubbles wrote:Fascination with deep water ?? Just stay away :lol: Honestly do you need to be driving through bonnet deep water ? I would be thinking a few things through first -not hacking on anyone but if it can be avoided then do soo. If you ultimately have to then I would be tarping, sealing holes with tape/silicon everything at your disposal...

As for holes in your airbox, It is like weep holes in the mortar of top ridges when installing roof tiles. Water and shit can get trapped and if it doesn't have any where to go then the roof will leak. THey are fairly necesaary...
In victorias high country river crossing preparation can be pretty important if you want to have a stress free trip. rivers can rise overnight. sometimes there may be another way out but if you are equipped properly to deal with a rivercrossing then it can be the difference between something that could have been stressful and altered your plans in a big way, or somthing that simply isnt an issue. (but kind of fun all the same) another problem can be misjuging the hight of the water, or if you get stuck half way accross, a snorkel that works properly is good insurance.
[url]http://www.vic.suzuki4wd.com/forum[/url]
User avatar
Ben
Posts: 4434
Joined: Thu Nov 28, 2002 3:25 pm
Location: Melbourne

Re: ..

Post by Ben »

JemmyBubbles wrote:Fascination with deep water ??
Nup, cheap insurance.

I know of 3 people who swamped their engines, and it wasn't doing anything to 'hard'...all it takes is a bit of bad luck. I'd much rather spend $500 now than $4000K+ down the track.
Apparently people think I'm too patronising (that means I treat them like they’re stupid).
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests