Page 1 of 1
winch dimensions
Posted: Wed May 03, 2006 9:39 am
by GQ Bear
I'm gunna build a new competition winch bar for my GQ. If anyone's got any spare time, could you measure the o/a dimensions of a warn 8274 winch and bolt hole-centres.
If anyone's got a schematic drawing or other dimensioned drawing they could post up, even better.
I have a slowmount now but i want to eventually get a highmount.
I'll let you know how i get on with the bar. If anyone's interested in a steel ARB deluxe winch bar suited to 2" body lift let me know by PM.
Thanx
Posted: Wed May 03, 2006 9:51 am
by Hales231271
Here is the dimensions of the high mount
Click on the pic and it should increase in size for better viewing.
Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm)
Cheers
Dazza
Posted: Wed May 03, 2006 10:12 am
by GQ Bear
Thanks Dazza, you wouldn't happen to have side elevations too would you, for depth
Thanx
Posted: Wed May 03, 2006 10:22 am
by Hales231271
Nope no diagram sory.
Have general dimensions but.
Gives the depth of the winch.
Winch Dimensions: 16.5" L. x 8.5" D. x 15" H.
(420mm L. x 220mm D. x 381 mm H.)
I would assume distance from front of winch to rear you would need
clearance to suit 220mm.
Cheers
Dazza
Posted: Wed May 03, 2006 10:37 am
by GQ Bear
Thanks Dazza, just what i was after.
Posted: Wed May 03, 2006 11:00 am
by bogged
GQ Bear wrote:Thanks Dazza, just what i was after.
the warn site has dimensions and images of all angles.
Posted: Wed May 03, 2006 11:11 am
by Hales231271
the warn site has dimensions and images of all angles.
Can you give me the link please??
I would not mind an image of another angle for the high mount.
Which also includes the dimensions.
Cheers
Dazza
Posted: Wed May 03, 2006 11:16 am
by GQ Bear
bogged wrote:GQ Bear wrote:Thanks Dazza, just what i was after.
the warn site has dimensions and images of all angles.
just had a look, same drawing only
thanx anyway.
