Page 1 of 1
100 Series Pads Into V6 4 Runner Calipers ?
Posted: Sun May 07, 2006 6:22 pm
by Bitsamissin
Has anyone tried this one yet ?
We know that with some trimming that they will fit into post 92 80 Series calipers.
We know that 80 Series calipers basically run the same pad as the V6 4 Runner calipers so logically they should fit ??
Posted: Mon May 08, 2006 12:54 pm
by hdj105
100 pads are a direct fit to post late '92 80 series, AFAIK it's only the earlier 80's that you have to trim them to fit.
No experience with the 4 runner, but based on what you said they should be a direct fit.
Posted: Mon May 08, 2006 6:28 pm
by -Nemesis-
Can I ask why you would? What's wrong with some good 4Runner ones?
Posted: Tue May 09, 2006 6:18 pm
by Bitsamissin
Because the Hundjy (anything else and I woulda been stuffed) ones are bigger.
So looks like no Tojo boffin has done it eh.............................
So I guess I'll fly the Toyitsu flag on my own then
Posted: Tue May 09, 2006 8:20 pm
by -Nemesis-
Bigger as in thicker?
From memory when I put new pads in the other week the 4Runner ones practically scrape the edges of the caliper housing anyways so you couldn't fit taller ones in etc.?
OR am I thinking about it wrong?
I'm interested as I have a 4Runner and need the best from the brakes I can get with the 1UZ.
