Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NH center of hub to...

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 271
Joined: Mon Mar 13, 2006 7:13 pm
Location: Melbourne

NH center of hub to...

Post by Shorti »

This is going to sound stupid. I went to get some springs to do a lift on the rear of my NH swb today, but then I thought that it already may have had a lift because it is a bit higher than other NH's I have seen around (3.0l petrol). The springs don't look aftermarket eg. a bright colour like most of those things are. So can anyone tell me an approx distance from the center of the hub to the top of the gaurd for a NH swb. :?
Posts: 123
Joined: Mon Aug 16, 2004 6:07 pm
Location: Down Under - Sid a nie

Post by .:Dave:. »

93 NH - Custom Bar - Uniden GPS 205 - IPF Spoties - The Blue Smoke Comes Standard
http://www.mpdconstructions.com
http://www.whiteovergreen.com
Posts: 271
Joined: Mon Mar 13, 2006 7:13 pm
Location: Melbourne

Post by Shorti »

Yeah The measurements off that first post seem to be off, and the second one doesn't really help. However the guys at pedders had the numbers i needed :) But thanks anyway Dave. If anyone in future wants to know its about 550 from the center of the rear hub to the top of the read gaurd is around 550mm standard.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest