Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

tips on mounting hi lift under ute tray

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 153
Joined: Mon Aug 30, 2004 12:51 pm
Location: Melbourne

tips on mounting hi lift under ute tray

Post by BrettInUte »

Im wanting in near future to mount my hi lift under my ute tray .
I have a flat steel tray - a bit over 1.8 m wide.

Im wanting to slide the hilift under from the side of the tray. (at the back - near the fuel filler (gq patrol)

I have just enough clearance to slide it under (once I lower the tie down rail a little)

Any tips on what to use to actually hold the jack
preferably
- something that keeps the mud + dust off it.
- doesnt require 3 weeks of cut /shut /weld to make it all fit !!

Im sure plenty of people have done this before...
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

http://www.endroad.com/page/page/711712.htm
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 792
Joined: Wed Mar 24, 2004 11:54 am
Location: Brisbane

Contact:
Contact Pinball

Post by Pinball »

yep, i'd back the quick fists....

got em holding axe, shovel and hi lift handle in the rr door of the zook.

Spock
www.pointnshoot.org
Suzuki Auto Spares Springwood
Century Batteries
Sylverkey
Extreme Coatings
Control Synergy
Top
Posts: 153
Joined: Mon Aug 30, 2004 12:51 pm
Location: Melbourne

Post by BrettInUte »

checked link. the "quick fist" - looks great - im sure it would hold a hi lift. But I cant see how I can use it to SLIDE the thing under the tray in the first place...

but Im open to suggestions.

Cheers.
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Could you mount a cylinder/tube to slide it into, then something like a single "quick fist" to secure it?

Scott
Top
Posts: 1279
Joined: Wed Jul 28, 2004 9:49 pm
Location: IN THE SHED

Post by GOT MUD »

so does anyone know if you can buy them from any shops (im in Qld)or only though the website
PUT YOUR HANDS UP IF YOU WANT TO GO FASTER
RTD Racing
OFFROAD CARTEL
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests