Outer Limits 4x4 Board

Im wanting in near future to mount my hi lift under my ute tray .
I have a flat steel tray - a bit over 1.8 m wide.

Im wanting to slide the hilift under from the side of the tray. (at the back - near the fuel filler (gq patrol)

I have just enough clearance to slide it under (once I lower the tie down rail a little)

Any tips on what to use to actually hold the jack
preferably
- something that keeps the mud + dust off it.
- doesnt require 3 weeks of cut /shut /weld to make it all fit !!

Im sure plenty of people have done this before...

yep, i'd back the quick fists....

got em holding axe, shovel and hi lift handle in the rr door of the zook.

Spock

checked link. the "quick fist" - looks great - im sure it would hold a hi lift. But I cant see how I can use it to SLIDE the thing under the tray in the first place...

but Im open to suggestions.

Cheers.

Could you mount a cylinder/tube to slide it into, then something like a single "quick fist" to secure it?

Scott

so does anyone know if you can buy them from any shops (im in Qld)or only though the website