Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

which engine do i supercharge

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 4
Joined: Mon Apr 17, 2006 2:33 pm
Location: gold coast

which engine do i supercharge

Post by minimonstertruck »

hi there
my 89 zook 1.3 carby engine is just about dead. should i rebuild it and fit a single point injector system and supercharge it or should i rebuild the jimny motor that i have and supercharge it. the jimny motor is missing the wiring harness, computer and coil packs so it would be a lot cheaper to do my original engine. i am looking for more torque not horsepower so i dont think it is worth while do the jimny motor as it only has 4nm more and it going to cost 2-3 times more to do?

any comments

thanks guys

adrian
Top
Posts: 885
Joined: Wed Jun 30, 2004 9:45 pm
Location: Maroochydore, sunshine coast

Post by spamwell »

jimny motor would be a whole lot better once it is done mate.

:D
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Which jimny motor is it? the g13bb or the m13

A couple people on here run the g13bb one.

nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 4
Joined: Mon Apr 17, 2006 2:33 pm
Location: gold coast

Post by minimonstertruck »

its the g13bb. just got a price for ems system $1300. should go pretty hard with just that i think?
Top
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

whats the ems system?

it would be quite costly just to grab the computer and make the loom for the jimny motor, but im supercharging mine atm, and they are a nice motor.

what supercharger you looking at using?
how much psi?
how are you mounting?

good luck!
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Top
Posts: 4
Joined: Mon Apr 17, 2006 2:33 pm
Location: gold coast

Post by minimonstertruck »

havent worked any thing out yet, just toying with ideas. ems is a complete aftermarket computer and loom.
Top
Posts: 86
Joined: Wed Feb 08, 2006 10:15 am

Post by Dee 4x4 »

minimonstertruck wrote:havent worked any thing out yet, just toying with ideas. ems is a complete aftermarket computer and loom.
Which you'd likely need when supercharging anyway. Don't count the lack of stock ecu as much of a loss at all.
S1 R33 Gts-t: ITS T04e, Wolf3dv4, 16psi - 242rwkw - DEAD (mate flipped it)

Sierra: 4AGE 20v, ARB rear locker, 30's
Top
Posts: 311
Joined: Fri Nov 12, 2004 3:59 pm
Location: Sunshine Coast

Post by beally »

I run 10psi + through stock computer :cool:
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 11 guests