just curious if this is known to fit? at first glance there appears to be matching brackets from the 3f to holes on the front left (looking to the rear of the vehcile) on the 2f.. curious about pully location as we didnt get much further than that.
I'm assuming it should fit as its the same series engine but would like to know for sure if possible. this is for a 78 fj55 with 2f..
a quick search revealled this link that might help also:
http://www.outerlimits4x4.com/PHP_Modul ... highlight=
I know a power steer box from a 40series will bolt straight into the 55's location without frame mods so just need to figure out if this pump will work with it too.
Any input into this would be appreciated and thanks for your help.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
3f power steer pump on a 2f
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 0 guests