Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Toyota 4runner/Supra 2.5 ltr twin cam twin turbo project

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 46
Joined: Fri Sep 19, 2003 8:11 pm
Location: Canberra

Toyota 4runner/Supra 2.5 ltr twin cam twin turbo project

Post by hobpedlar »

I am hoping to transplant a 2.5 ltr twin turbo into my manual 1990 4runner.
It looks like I have sourced a front cut from a Supra although the year and exact model are not confirmed yet.
I would like any advice or tips re:
Engine swap
Wiring problems
Gearbox options(will the stock box take the change?)
Cruise Control issues(I have factory fitted CC)
Exhaust Issues(will need to routed down the opposite side of the chassis?)
etc.etc.
Any advise,tips,pics or experiences from similar conversions would be greatly appreciated.
I am in Canberra Australia and any local assistance would be most welcome
Posts: 215
Joined: Wed Aug 06, 2003 9:29 am
Location: Perth, WA

Post by Skip »

Have a look at what model gearbox is written on the plate on the firewall in your engine bay. It will say axle/trans before it i think. When you post the number we can tell you if your gearbox is any good or not. I am doing a similar conversion in a Bundera.
Posts: 46
Joined: Fri Sep 19, 2003 8:11 pm
Location: Canberra

Trans/Axle

Post by hobpedlar »

The code on the Firewall is as follows:

Trans/Axle G52 / G145

5 Speed O/drive box
Thanks for reply
Posts: 215
Joined: Wed Aug 06, 2003 9:29 am
Location: Perth, WA

Post by Skip »

The G52 is not good with handling alot of power, personally if I were to use a 1JZ, 2JZ or 1UZ I would definetly use an R series gearbox. Im not actually sure what is required when swapping one of these boxes with respect to your transfer case, Anyone? However you will have no problem getting a bell housing to suit.
Posts: 2979
Joined: Mon Feb 24, 2003 7:03 pm
Location: Melbourne

Post by robbie »

nick (bundera) has swapped the 2ltr TT soarer motor into his using the stock G52, seems to handle ok.

my mate who has the same motor/G52 combo hasn't had any dramas with his box yet and he has driven on his for ages now..

and mind you, he doesn't drive like a softy either
Posts: 46
Joined: Fri Sep 19, 2003 8:11 pm
Location: Canberra

R series box

Post by hobpedlar »

Which vehicle would I find an R series in??
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest