Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

a thought on a tb42 stroker

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 69
Joined: Mon May 29, 2006 1:05 pm
Location: dandenong ranges melbourne

a thought on a tb42 stroker

Post by gqtrol »

just thinking on tb42 engine mods came up with the idea of putting tb48 crank,rods and pistons into a tb42 wether it could work or not as i dont know how similar the blocks or the barrels dont know stroke lengths so on and so fourth but in theroy anything is possible i think it would be safe to say i wouldn't be the first person to think of it please let me here thoughts
GQTROL
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

what about fitting a short motor with the tb42 head (prolly higher compression) or long motor and bigger injectors in the tb42e manifold?
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

I think it might be able to be done with the TB45, but believe the TB48 is a different block.
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Top
Posts: 317
Joined: Fri Nov 18, 2005 9:32 pm

Post by ats4x4dotcom »

have seen afew done, and cruiser 4.5's by having the crank welded and reground at new stroke, by Crankshaft rebuilders in Melbourne.

I believe with a rebore they were going up to 4.8-5.2lt.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests