Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FITTING BOOST GUAGE TO 2.8 GU

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 8
Joined: Fri Jun 16, 2006 7:36 pm
Location: BRISSY

FITTING BOOST GUAGE TO 2.8 GU

Post by TAYLOR »

HELLO ALL!!! HAVING PROBLEMS FITTING A BOOST GUAGE TO MY PATROL, CAN ANYONE HELP, WERE DO YOU PLUMB IT IN :cool:
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

have just done this,

we tapped intop the waste gate actuator line, that runs from the turbo up to the intercooler,

there is a hose between the fire wall and back of the cooler, this will give you a pretty good reading, there might be other places, but this was the one we found,

also, when you do it what boost pressure does yours get a full throttle?
Top
Posts: 8
Joined: Fri Jun 16, 2006 7:36 pm
Location: BRISSY

Post by TAYLOR »

THANKS OZY1, I THOUGHT THAT MIGHT BE THE PLACE. MY GU RAN 12.5 BUT JUST HAD A COMPUTER FITTER AND KNOW RUNNING 14PSI. ON THE DYNO IT DIDNT MAKE ANY MORE POWER SO 14 IS COOL WITH ME...
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 12 guests