Ok.I've sourced a 1JZ-GTE,an R150F box and now to complete a good weeks work I need to know where I can get a rear disk brake conversion kit for a 90' 4Skinner.Anyone out there done this before?
I can get a disk transferecase hand brake set-up from the US but would prefere to get everything local so when it breaks I can fix it within a month.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4runner rear disc kit
Moderators: toaddog, Elmo, DUDELUX
I used GQ rear disks and subaru front calipers on the rear of my bundera, works good, does need a proportioning valve to get the balance right though. made up some brackets from 8mm plate. all goes together pretty easily once the brackets are fabricated.
there are pictures of it in the bundera engine conversion thread.
there are pictures of it in the bundera engine conversion thread.
Who is online
Users browsing this forum: No registered users and 0 guests