Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

steel centre for cruiser

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 592
Joined: Wed Apr 19, 2006 8:19 pm
Location: ipswich

steel centre for cruiser

Post by rover1 »

any body know where you can get a steel centre for a cruiser ute.
a mate of dad's asked me and all a could think of was an arb locker centre is steel, but he doesn't want a locker because the truck in question has a lazy axle added on and a dirty big camper on the back.
the cast centre just smashed to bits, it think its the extra strain when turning corners.

anybody know if you can get a standard or lsd steel centre?
cheers Pete.

its the skinny pedal
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Mate...if the centre that smashed was an open centred diff, a cast lsd is 4 times stronger......an arb centre is also strong, but not much more than the lsd.....i would run an 80 series lsd...they fit straight in with 80 series carrier bearings...
Andrew
Top
Posts: 592
Joined: Wed Apr 19, 2006 8:19 pm
Location: ipswich

Post by rover1 »

sweet, thanks for that. let you know how it goes.
cheers Pete.

its the skinny pedal
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests