Just extending my breathers. Had no problem with the rear just pulled the stock cap of and added some tight fitting fuel line and a hose clamp. Then ran the hose yp to were the rear window electricts are cable tied it up high and put it in an orchy bottle with a few pin holes in it.
But what about the front do you think there is a problem with the hose being so close to the sump? It almost touches should I go get a bit that fits from a hydraulics place?
The rig is a YN63 4runner 4Y-C IFS
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Breather
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 1 guest