Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rubber Questions

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Rubber Questions

Post by mudmacaca »

Will I fit 33x13.5x15 tyres under a 4runner with 3" body lift?
Will I lose full lock?
Will I need spacers to keep full lock?
What do you think of the Maxxis mudzillas?
Top
Posts: 230
Joined: Wed Jun 21, 2006 7:38 pm

Post by kinglakekustoms »

hey mate there was recently a thread on maxxis mudzillas recently not sure if ya redit but heres the link hope it helps..

personally i think they will fit fairly easy on ya rig they will hit ya leafs most likely on full lock... but your not going to loose to much of your turning circle
any way thats my two cents hope that helps
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=79901
Big thanks to Northern Suburbs Radiators and Melbourne Drive Shafts and Balancing for all your help and support.
Top
Posts: 80
Joined: Tue May 02, 2006 11:55 pm
Location: The Go

Post by playdoh »

What year model 4Runner, I was running that size on my old one ('93 model) with a 2" lift, they were on 15x10 rims with -15 offset.
Top
Posts: 412
Joined: Mon Jul 10, 2006 10:53 pm
Location: 36 28'56 S 150 04'11 E

Post by mudmacaca »

89 ifs am gunna run them on 15x8 rims and same amount of lift
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests