Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
This was made from the original rollbar that i bought with the ute it has been sitting in my shed for ages and thought i may as well do something with it.So with some help from a mate of mine who has a welder we reshaped it to what you see now.
I forgot to take pics of the rollbar before we started so i drew a lame picture at the bottom of the pics so you could get an idea of what it looked like before.. Just keep in mind that iam not real good at drawing pics..
Tell me if you think the Hi-lift jack is better on the rollbar or the header board?
I only moved it so it was easy to get to for example if the tray was full of camping gear and i had a blow out i would have to take stuff out to get to it..
